This author has not written his bio yet.
But we are proud to say that chinabearingadmin contributed 82 entries already.
Inch tapered roller bearings refer to tapered roller bearings whose dimensions are measured in inches, originating from British and American countries. Inch tapered roller bearings, like metric tapered roller bearings, consist of an inner ring, an outer ring and tapered rolling elements. Due to their designed geometry, tapered roller bearings can withstand combined loads (axial […]
Tapered roller bearings are separable bearings, and both the inner and outer rings of the bearing have tapered raceways. This type of bearing is divided into different structural types such as single-row, double-row and four-row tapered roller bearings according to the number of rows of rollers installed. Single row tapered roller bearings can withstand radial […]
The basic structure of the bearing: the inside of the bearing is generally composed of an inner ring, an outer ring, rolling elements and a cage. For sealed bearings, there are lubricants or greases, sealing or shielded. Rolling bearing part: The part where the rolling elements roll on the ring is called the raceway, and […]
Tapered roller bearings are separate bearings. Both the inner and outer rings of the bearing have tapered raceways. This type of bearing is divided into single, double and four-row tapered roller bearings according to the number of rollers installed. Single-row tapered roller bearings can support radial loads and axial loads in one direction. When […]
Spherical Roller Thrust Bearings are the same with spherical roller bearing, both of them are all self-aligning design, the raceway surface of the seat is a sphere which centered on a point and be coincident with the center axis of the bearing. and also the rollers of Spherical Roller Thrust Bearings are spherical, Therefore, it has self-aligning […]
Miniature Thrust Ball Bearings are only one kinds of Thrust Ball Bearings, But smaller size than normally thrust ball bearings, It’s a separable bearing with a contact angle of 90, which can be installed separately and can only bear the axial load. The limit speed of the miniature one-way thrust bearing is low, and the […]
King Pin Bearing with Tapered Roller King Pin Bearing with Ball King Pin Bearing with Metal Shell King Pin Bearings also named King Pin Thrust Bearings, […]
With the development of the world economy, the rapid development of urban infrastructure and transportation infrastructure, the market has a corresponding increase in demand for construction machinery and equipment, and the consumption of bearings for construction machinery is also increasing day by day. Bearings with reliable quality and excellent performance can improve the efficiency of […]
The floating end of the motor is also called the free end, which is relative to the fixed end; in general, the free end is selected at the non-drive end, but the motor load requirements are higher, and the axial matching size requirements with the load equipment are not very high. In this case, the […]
On August 4, 2021, Schaeffler announced the acquisition of BEGA International B.V., a leading manufacturer of special tools for mounting and dismounting rolling bearings. This acquisition is another important move for Schaeffler to continuously expand its bearing service product portfolio throughout its life cycle. Connecting BEGA’s intelligent maintenance tools to the industrial IoT platform dedicated […]
Add: No.575,Liaocheng Development zone, Liaocheng, Shandong Province of China
Factory add: Yandian Industrial zone, Liaocheng city, Shandong province of China
Contact: Fred.W
Tel: 86-635-8509787
Mobile: 0086-13290257228
Whatsapp: 0086-13290257228
Wechat: 0086-13290257228
Skype: brandbearings
E-mail: brandbearings@gmail.com
